Sumitomo F50 Compressor Manual

Before connecting the stainless steel flexible helium lines to your cryopump or cold head:

Mandatory replacement of the main charcoal adsorber module.

Allow cooling water to run for at least 10 to 15 minutes after shutdown. This removes residual heat from the compressor capsule and prevents thermal stress on the oil. Turn off the cooling water supply. 4. Maintenance Schedules

| | Cooling Capacity (2nd Stage) | Power Consumption | Voltage | Key Features | | :--- | :--- | :--- | :--- | :--- | | F-50L (Low Voltage) | 0.5W at 4.2K (50/60Hz) | 6.5 kW (50Hz) / 7.5 kW (60Hz) | 3 Phase, AC 200V (50/60Hz) | Water-cooled, pairs with GM Cryocoolers and RP-062B Pulse Tubes | | F-50H (High Voltage) | 0.5W at 4.2K (50/60Hz) | 7.2 kW (50Hz) / 8.3 kW (60Hz) | 3 Phase, AC 380/400/415V (50Hz); AC 460/480V (60Hz) | Water-cooled, energy-efficient, includes thermal overload protection | sumitomo f50 compressor manual

The installation chapter would provide detailed requirements for setting up the F-50 compressor:

The gas passes through an Adsorber (active charcoal layer) to ensure high purity before being sent back to the cold head via the supply line. 3. Installation & Safety Guidelines

If you just need , tell me the specific issue (e.g., "overload trip", "low discharge pressure", "fault code E-12") and I’ll try to help based on common Sumitomo scroll compressor logic. Before connecting the stainless steel flexible helium lines

The is typically an oil-free scroll air compressor (part of Sumitomo's "F" series, often under the brand Sumitomo Heavy Industries or through their SHI / Bipel distribution).

The adsorber is a critical consumable component that filters impurities from the helium gas circuit, with a typical service life of . The adsorber is compatible with several Sumitomo models including the F-50H, F-50L, and others. It uses a high-purity activated charcoal filter to capture contaminants.

591 x 450 x 585 mm (approx. 23.3 x 17.7 x 19.1 in). Weight: 120 kg (264 lbs). Installation & Setup Turn off the cooling water supply

Check the phase rotation of your 3-phase power supply. If the phase is correct but the noise persists, the compressor capsule may be failing and require depot-level rebuilding.

Once you secure the manual, you can expect it to be organized into several critical sections. While the content is proprietary, its structure will likely follow standard industrial equipment documentation.

Due to the specialized nature of the Sumitomo F50 compressor, obtaining the official manual often requires contacting an authorized distributor or service center. Based on user forums, a direct request is often the most effective approach. For critical components, you can find adsorbers (part numbers like RE05TN1211) and other spares through medical equipment marketplaces like EquipNet and GE HealthCare's service spare parts store. For repair services, specialized third-party companies like Trillium offer repairs on Sumitomo F50 compressors, though they may not warranty replacement capsules for certain series.

Once you obtain the manual, tab the following pages for quick access:

Approximately 110 kg (242 lbs), requiring proper mechanical lifts during installation.