Acer Aahd3vc Motherboard Manual Install ((new)) File

Press down firmly on both ends of the RAM module until the plastic clips automatically snap shut with a click. 4. Mounting the Motherboard in the Case

AMD Socket FM2 (Supports A-Series, Athlon, and FirePro APUs). Chipset: AMD A75 Hudson D3.

Connect to the reset pins adjacent to the power switch.

Connects to the designated positive (+) and negative (-) pins. If the front light doesn't blink during storage use, flip the connector orientation. acer aahd3vc motherboard manual install

Lift the socket lever on the FM1 socket. Align the gold triangle on the corner of your AMD processor with the triangle printed on the socket. Drop the processor vertically into place without applying force. Lower the lever to lock it.

Catch the metal clips of the cooler onto the hooks of the plastic frame.

The best place to find the manual and front panel mapping is on the Acer Support Website by entering your specific desktop serial number. Press down firmly on both ends of the

Install the storage drive:

Gently lower the Acer AAHD3VC into the case at an angle, aligning the rear ports with the openings in the I/O shield. Lay the board flat against the standoffs.

With everything plugged in, connect your monitor to the motherboard's rear video ports (or your graphics card if installed), plug in the power cord, and flip the PSU switch to "On". Common Post-Install Issues Probable Cause Chipset: AMD A75 Hudson D3

AMD A-Series APUs (e.g., A4, A6, A8) and Athlon II series processors for Socket FM1

PS/2 mouse and keyboard ports, VGA, HDMI, 4 x USB 2.0 ports, 1 x RJ-45 Ethernet port, 3 x Audio jacks 2. Pre-Installation Preparation