Place the storage tank or drum within a secondary containment dike capable of holding 110% of the largest vessel's volume.
Run the discharge tubing from the pump to the injection quill.
In case of a spill, contain the material, absorb with inert material (sand or vermiculite), and dispose of according to local regulations. 4. Conclusion nalco 3272 msds install
Isolate the main chemical tank and pull water/product from a graduated calibration column. Run the metering pump for exactly one minute.
Remove contaminated clothing. Wash the affected skin area thoroughly with soap and water. Place the storage tank or drum within a
SECTION 02 COMPOSITION. AND INFORMATION. ON INGREDIENTS. Our hazard evaluation has identified the following chemical ingredient(s) files.dep.state.pa.us NALCO MATERIAL SAFETY DATA SHEET
– If you are a customer, they must provide the current SDS per OSHA (if in the US) or local regulations. Remove contaminated clothing
Contains paraffin wax, hydrotreated light distillate, straight-run middle distillate, and aliphatic alcohols.
: Avoid using feeding equipment made of aluminum, copper, or brass, as these materials can react poorly with the chemical's alkaline properties.
Immediately flush eyes with plenty of water for at least 15 minutes, holding eyelids open. Seek medical attention immediately.
The Safety Data Sheet (SDS) is a legally mandated document under the OSHA Hazard Communication Standard (29 CFR 1910.1200), aligned with the Globally Harmonized System (GHS). When reviewing the Nalco 3272 SDS, facility managers must prioritize the following core sections: Section 2: Hazard Identification