Satellites frequently shift their transponder frequencies, symbol rates, and polarities. A TP list update updates these coordinates. Without it, your meter will try to read frequencies that no longer transmit data, preventing a signal lock.
If you can tell me the of your device (usually on the back) and where you bought it , I can help you find the correct firmware. Also, Share public link
In the update tool, click or "Browse" and select the .bin firmware file you downloaded. 4. Flashing the Device Click "Upgrade" or "Next" .
Note: The exact names of buttons may vary slightly depending on the specific upgrade tool version provided by the vendor. satlink ws 6933 software update work
: Updated binaries refine signal-to-noise ratio processing for more precise dish positioning.
- The issue could be due to changes in satellite broadcasting parameters, which a software update can fix. Solution: Before updating, manually edit the transponder settings as a temporary fix. For instance, if you are aligning for Freesat on Astra 28.2°E, you may need to change the symbol rate from 22,000 to 23,000 for DVB-S2 transponders. This is a clear sign that updating your firmware or satellite list is necessary.
Never disconnect the cable or force a shutdown if the update stalls. If you can tell me the of your
This document outlines the necessary procedures for updating the software (firmware) and satellite database on the Satlink WS-6933 satellite signal meter. Regular updates are essential for ensuring compatibility with modern satellite transponders, fixing known software bugs, and optimizing the user interface for field operations. This guide covers preparation, data backup, the update process via PC, and post-update calibration.
⚠️ Do not unplug the cable or turn off the device during this process. A power loss during the flash will corrupt the bootloader. Step 5: Post-Update Reset
The screen should display "Firmware Update Mode" or "Upgrade Mode." Select "Start Update" or "Yes." Flashing the Device Click "Upgrade" or "Next"
Ensure the battery is fully charged. Low power can cause flashing errors.
: Navigate to System Setup in the device menu; the first line displays the current hardware serial number and software version.
Connects your meter's USB port to your PC.
Check the file size – it should be around 2MB to 4MB. Corrupted files will fail during flashing.
Select the correct COM Port identified in the Device Manager.