Zk-pp2k Manual Site

Long-press the encoder knob for 2 seconds to enter .

If settings do not save, ensure you are pressing the Set button to confirm.

on the screen. Best for continuous signals (e.g., motor speed or light dimming). PULSE Mode: Zk-pp2k Manual

Before diving into the button sequences, let’s review the hardware specifications.

Fire a few test shots after every quarter-turn to see the flight path stabilization. 4. Field Stripping and Disassembly Long-press the encoder knob for 2 seconds to enter

is a high-power PWM signal generator and motor driver capable of directly driving loads up to (150W). Its standout feature is its

Press the ON/OFF button. The device will count down 5 seconds, discharge 50 clean pulses, and automatically stop. 5. Troubleshooting and Best Practices Best for continuous signals (e

The ZK-PP2K is controlled via four tactile buttons on its front panel. A basic understanding of these buttons is essential for using the module effectively. The table below provides a quick reference.

Short-press SET to cycle through parameters: P+: Positive pulse width time (seconds). P-: Negative pulse width time (seconds). N: Number of pulses (1-9999, or ---- for infinite). D: Delay time before starting.