: Connect a high-quality mini-USB cable from the programming port on the back or side of the DCP-10 module directly into an open USB port on the laptop.
: Adjust timers, voltage/frequency thresholds, and engine crank attempts.
Right-click the downloaded DCP-10_Setup.exe file and select .
Modifying generator control parameters can cause equipment damage or safety hazards if done incorrectly. Follow these strict safety protocols:
If you encounter issues with the DCP-10 software, refer to the troubleshooting guide below:
This older framework must be active on your Windows machine for the installer to execute properly. 3. Connect the Hardware
The DCP-10 is a digital control panel used on FG Wilson generator sets (typically smaller rental/industrial sets). It allows monitoring, start/stop control, and parameter adjustment.
Displays real-time engine and generator parameters. You can log this data to a CSV file for trending.
To download the FG Wilson DCP-10 software, you can visit the FG Wilson website or a authorized distributor's website. Here are the general steps:
Communication with a PC is accomplished via a mini USB interface (the DCP-10's primary communication port). All connections use secure plug-and-socket designs for ease of connection, movement, maintenance, and replacement.
has a dedicated communication port on the rear of the module.
While the software allows for full-scale calibration, operators must understand how the PC parameters match up with the physical front-panel keys. Fg Wilson Dcp-10 Software Download //free\\ -