⚠️ Do not use Prolific or CH340 drivers – they will not work.
Once the driver is installed, use a terminal emulator like PuTTY or SecureCRT with these settings: 9600 bps (Note: Some models may use 115200). Data Bits: 8 Parity: None Stop Bits: 1 Flow Control: None Critical Usage Notes CP210x USB to UART Bridge VCP Drivers - Silicon Labs
Check Point appliances typically utilize standard, industry-grade USB-to-UART bridge chips inside their hardware chassis. The most common chipsets used in Check Point appliances are manufactured by: FTDI (Future Technology Devices International)
Plug the USB-C cable from your laptop into the console port of the powered-on Check Point appliance. Verify in Device Manager: Right-click the Start menu and select Device Manager . Expand the Ports (COM & LPT) section. checkpoint usb-c console driver
When you download the console driver package from the Check Point UserCenter (Support Center), you are downloading a verified, digitally signed package tailored for compatibility with Check Point appliances such as the Quantum Spark series (e.g., 1500, 1600, 1800 models) and enterprise Quantum Security Gateways. Operating System Compatibility and Installation
: Gatekeeper or system integrity protections blocked the driver extension.
: While primarily focused on Windows (including Windows 10 and 11), versions for older systems like Windows 7 are still maintained for legacy hardware support. Critical Connectivity Settings ⚠️ Do not use Prolific or CH340 drivers
If you have a User Center account with active support, this is the safest method.
For newer Quantum appliances, Check Point provides a dedicated driver package, often listed as USB_serial_driver_QuantumII.zip . This is typically found via Check Point Support sk102404 . Step-by-Step Installation Guide
Open your preferred terminal software (such as PuTTY, SecureCRT, or Tera Term) and apply these standard serial settings to connect to the Gaia CLI. The most common chipsets used in Check Point
There are two reliable ways to get the driver.
The transition from Serial to USB-C console ports streamlined the hardware but added a software step for administrators. By installing the Silicon Labs driver and ensuring your baud rate is set to , you can bypass the initial setup panic and get your gateway configured in minutes.
Click for the Silicon Labs or Check Point kernel/system extension. Restart your Mac. Verifying the Driver Installation